Batery Li-Po 1100mah

Li-po 1100mah battery a lithium polymer (li-po) 1100mah battery is a rechargeable battery commonly used in rc drones, remote-controlled cars, robotics, portable electronic devices, and diy electronics projects. li-po batteries are known for their high energy density, lightweight design, and ability to deliver high discharge currents, making them ideal for applications requiring compact and powerful energy storage.

unlike traditional li-ion cylindrical batteries, li-po batteries have a flexible pouch-like structure, allowing for various shapes and sizes. however, they require careful handling to avoid overcharging, over-discharging, or physical damage, which could lead to swelling or fire hazards.

specifications of li-po 1100mah battery basic characteristics -battery type: lithium polymer (li-po) -capacity: 1100mah (1.1ah) -nominal voltage: 3.7v (single cell) / 7.4v (2s) / 11.1v (3s) (varies by configuration) -cell configuration: 1s (3.7v), 2s (7.4v), or 3s (11.1v) -battery chemistry: li-po (lithium cobalt oxide - licoo₂) performance & power output -discharge rate (c-rating): typically 10c - 50c (depends on model) -maximum continuous discharge current: -example: for 20c rating → 1100mah × 20 = 22a -charge voltage (per cell): 4.2v max -discharge cut-off voltage (per cell): ~3.0v charging & safety -recommended charge current: 1c (1.1a) -maximum charge current: 2c (2.2a) (varies by manufacturer) -connector type: jst, xt30, xt60, or others (varies by model) -protection circuit: requires a battery management system (bms) or li-po charger with balancing for multi-cell packs physical characteristics -weight: ~25-80g (varies by cell count and manufacturer) -dimensions: ~50mm × 30mm × 10mm (varies by model and configuration) -form factor: soft pouch or hard case (depends on application) applications -rc drones, cars, boats, and airplanes -arduino and raspberry pi projects -portable electronic devices -robotics and automation -power banks and diy battery packs safety considerations -use only a li-po balance charger for multi-cell packs -avoid overcharging (above 4.2v per cell) and deep discharging (below 3.0v per cell) -store in a fireproof bag when charging -do not puncture or expose to extreme heat