ESC with Brake, Forward Reverse Easy To Install RC Car Boat ESC for Replace the Old or Damaged for Remote Control Car Boat Model((With brush ESC))

Function:
1 Connect the power supply. Connect the motor and
connect the receiver, it will sound "DO" This means that the electricity
is turned on normally.
2. When in the middle position, the motor
will immediately release the DO BEMI. If not in the middle position, the
motor will make a DO sound.
3 The DO sound will stop, immediately emit DO BE MI and work normally, until the user is interrupted in the middle location.
4
LED Status, if the remote control is in the middle position, the LED
will be half on or off. When you move it back and forth, the LED will
light up completely. If there is no signal, the LED will flash.
5 Direct fitment specially designed for 20AESC with brakes, RC carts models.

Specifications:

Condition: 100% Brand New
Item Type:ESC
Material: electronic parts
Operating Voltage: 3.0 V -- 9.4 V
Input Signal Type: PPM
Drive frequency: 2KHz
Output Current: Continuous:20A 30SEC25A 5SEC50A instantaneous current 80A
Weight: 11g / 0.4oz (approx) (includes wire and plug)
Size: about 30 x 23 x 5mm / 1.18 x 0.91 x 0.2in (L x W x Thickness)(±1-2cm)
JST line, red for positive pole, black for negative
a> 3P wire black (negative), red line (positive), white line (signal line)